25
Setting The Current Date And Time
1. Turn the dial to the
SET
CURRENT DATE/TIME
position.
2. The current year will be flashing
in the display. Use the and
buttons to change the year.
After setting the correct year,
push the button to proceed
to setting the month.
3. The month and day will be in the
display. The month will be
flashing. Use the and
buttons to change the month.
Press the button to proceed
to setting the day.
4. The day will be flashing: Use the
and buttons to change the
day of the month. (The day
of the week is automatically
indicated by an arrow in the
bottom of the display pointing
to the day.) Press the button
to proceed to setting the time.
5. The time will be displayed: Use
the and
buttons to select
AM, PM, or 24 hr. Press the
button to move to hours. Hours
will be flashing. Use the and
buttons to change the hour
shown on the display. Press the
button to move onto the minutes. Minutes will be
flashing. Use the and buttons to change the minutes shown
in the display. The date, day, and time have now been set.
PM
SET CURRENT
DATE /TIME
SET PROGRAM
START TIMES
PM
START TIME
Setting Program Start Time
1. Turn the dial to the
SET
PROGRAM START TIMES
position.
2. The factory preset is set on
program
A
. If necessary you
can select program
B
,
C
, or
D
by pressing the
button.
3. Use the and buttons
to change the start time.
(Advances in 15-minute
increments.)
4. Press the button to select
the next start time, or
for
the next program.
NOTE:
Regardless of the order in which the start
times are entered, the ICC will always arrange the
start times in chronological order when the dial is
moved off the
SET PROGRAM START TIMES
position.
One start time will activate stations sequentially in that program one
at a time.
Multiple start times in a program can be used for separate
morning, afternoon, or evening watering cycles. Do not enter a start
time for each station.
