12
CONNECTING STATION MODULES ......................................................................................
The ICC controller is supplied with one factory-installed station module
for up to 8 stations. Additional modules may be added in increments of
4 or 8 stations to expand the controller’s station capability (maximum
of 32 stations with plastic cabinet and maximum of 48 stations with
metal, stainless steel cabinet or plastic pedestal). Additional modules
are purchased separately.
ICM modules now have a Positive-Lock™ feature that fastens the
module securely into the ICC. Rotating the Positive-Lock lever makes it
easy to lock or unlock the module(s).
1. When installing additional modules, you will need to turn AC power
off at the controller.
2. Rotate the Positive-Lock lever on the module clockwise to the
unlock position.
3. The module needs to be inserted into the next sequential position in
the back of the controller.
Note:
If you are using a 4-station module,
it must be in the last sequential position on the controller.
Example:
For an area that needs 12 stations, the first module will
be an 8-station and the 4-station module will be below it. Note that
station numbers are identified on the back panel, not the individual
modules.
4. Insert the module into the controller’s expansion slot with the tab
end first (opposite side with the Positive-Lock lever).
5. Push the module into the expansion slot and rotate the lever counter-
clockwise (until the lever is flush with the side the module) to lock
the module in place.
6. Restore power to the controller. Turning the power off and on
again permits the microprocessor to recognize the newly installed
modules. You can also use the reset button on the back of the front
panel to reset the microprocessor to recognize additional modules.
Note: The Positive-Lock™ feature was added
to ICM modules date coded 12/02 or newer. The
modules will also work with older ICC units.
Positive-Lock™ Lever
