INSTALLATION
4
Mount the Installation Brackets — Inside Mount
■
Mark 2" in from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets. Mount into wood whenever possible.
➤
With shades using a battery wand, there must be a minimum of 15" between brackets
at the motor end.
■
Center the brackets on your marks and mark the location of the screw holes.
➤
Allow
3
/
4
" space behind the brackets for
rear fold clearance. (This also provides
battery wand clearance.)
➤
With this
3
/
4
" allowance, the minimum
casement depth required to mount the
installation brackets is 1
5
/
8
".
➤
The minimum casement depth to fully
recess the shade is 2
3
/
4
".
➤
Add
1
/
4
" to all of the above dimensions for Vignette
®
Tiered
™
Architella
®
shades.
IMPORTANT:
The front edges of the installation brackets must be aligned to each other.
■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into
drywall.
■
Use a level to check that the mounting surface is
level. Shim the brackets if necessary.
■
Attach the installation brackets using the screws
provided.
Proceed to “STEP 2 — Install the Shade” on page 8.
2"
Space Evenly
Jamb
Jamb
Space Evenly
(15" Minimum for Battery Wand
at Motor End)
2"
2¾" Fully
Recessed
Depth
