background image

IMPORTANT

When yacht is underway blinds should 

be stored in the ‘up’ position to avoid 

damage

Please read these instructions before 

fitting your blind

KEEP THIS DOCUMENT  

IN A SAFE PLACE

© Dometic UK Blind Systems Ltd

SKYVENETIAN 

Fitting & Operating  

Instructions

Summary of Contents for SKYVENETIAN

Page 1: ...erway blinds should be stored in the up position to avoid damage Please read these instructions before fitting your blind KEEP THIS DOCUMENT IN A SAFE PLACE Dometic UK Blind Systems Ltd SKYVENETIAN Fitting Operating Instructions ...

Page 2: ...e for marking the guide wire hold down positions It is important that the guide wires run parallel to ensure smooth operation of the blind The guide wires on a 25mm head rail use a central spring in the head rail to maintain tension When fitting the guide wire hold downs make sure that the spring is not pulled to the side as it can interfere with the top of the ladders Option A Chrome or Brass Dom...

Page 3: ...ing rail Lift up the slat which covers the bottom rail of the blind Adjust ladder braid as required by cutting the ladder braid to enable it to be pushed into the hole in the moving rail until the regarded drop is reached Grip the ladder either side of the bottom bar to hold the ladder in position Twist the ladder and then push the ladder into the bottom hole Trim any excess braid and replace the ...

Page 4: ...e tilted the blind will begin to raise or lower depending on which side of the loop you pull Powered continually press the up or down button Note For blinds using wands the slats should not be tilted when the blind is in it s stowed position 10 Warranty Head rail Head rails are not salt water proof Blinds should not be fitted in areas which will be exposed to salt Cabin conditions Venetian blind s...

Reviews: