INSTALLATION
11
■
Install the cover with the slot aligned to the socket in the battery wand.
■
Plug the power cable from the shade into the
extension cable.
■
Plug the other end of the extension cable into
the socket in the battery wand.
If you ordered a Magnetic Hold-Down Brackets, proceed to “Attach Magnetic Hold-Down
Brackets (Optional)” on page 13; otherwise proceed to “Testing the Shade” on page 14.
If You Have a DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shade into the
extension cable.
■
Plug the other end of the extension cable into
the DC power supply.
■
Plug the DC power supply into a standard outlet.
■
Secure the extension cable using wire
retainers (not supplied). If hiding the cable
behind the shade, make sure it does not
interfere with the operation of the shade.
■
Space the wire retainers approximately
15" apart along the power supply wire,
as shown.
Power Cable
from Shading
Extension
Cable
DC
Power
Supply
15"
Maximum
Wire Retainers
Battery Wand Cover
Slot
Socket
Battery Wand Cover
Extension
Cable
Power Cable
from Shade
