CARE
25
Removing the Shading
■
Fully raise the shading.
■
Disconnect the power source from the power cable at the
back of the shading.
■
Move each lever of the installation brackets to the left to
release the shading.
CAUTION:
A flat blade screwdriver can be used to move
the lever. Be very careful not to tear or damage the fabric.
➤
If the lever is inaccessible
or inoperable, lower the shading until
you can see the underside of the
bracket. Carefully reach a small flat
blade screwdriver behind the shading
to the tab on the bottom of the
bracket between the screw holes.
➤
Push the tab away from the shading
and pull the headrail to release it
from the bracket.
■
Carefully pull the headrail to completely
remove the shading from the brackets.
Cleaning Procedures
Silhouette
®
and Nantucket
™
Window Shadings are made of 100% polyester, which means they
are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric,
particularly where the vanes meet the facings.
The Palette
®
Fabric-Covered Headrail
■
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water and a mild soap
solution; handle with care as you would any fine fabric.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Tab
Installation Bracket
Underside of
Bracket
End Cap
Move the lever to the left
to release the shading.
Top View
