INSTALLATION
11
Attach the Optional Dust Cover (If Applicable)
The dust cover is used to protect the top of the headrail from exposure on outside mounted
shadings.
■
Cut the dust cover to desired width.
■
Remove the paper backing on one side of the hook and loop
fastener dots.
■
Apply the dots to the installation brackets on each end of the shading.
■
Remove the remaining paper backing from the dots.
■
Center the dust cover over the top of the shading, above the previously placed dots.
■
Press the dust cover down onto the dots.
Proceed to “Attach Magnetic Hold-Down Brackets (Optional)” on page 15
or “Testing the Shading” on page 16.
Remove
Paper
Backing
Overhead View
No Dust Cover
Dots
Dust Cover Installed
