OPERATION
11
Problem
The shade will not snap into the mounting brackets.
Solution
Check that the specialty brackets are level and aligned. Shim the specialty
brackets to level the headrail, if necessary.
Be sure the heads of the screws are flush against the specialty bracket.
Check that the headrail is completely inserted into the specialty brackets.
See “Install the Shade” on page 8.
Problem
The shade does not raise or lower evenly.
Solution
Make sure the specialty brackets are level and aligned.
Make sure that the shade fabric is not caught between the specialty bracket
and the headrail or bottom rail.
The cord tension may be uneven. See “Adjust the Tension, If Necessary” on
page 9.
Problem
The shade is too easy or too hard to raise or lower, or will not raise
or lower.
Solution
Make sure that the shade fabric is not caught between the specialty bracket
and the headrail or bottom rail.
Check that the specialty brackets are level and aligned. Shim the specialty
brackets to level the headrail, if necessary.
If the shade is too easy to raise and lower, or the moving rail(s) sag downward
instead of remaining steady, then increase the cord tension. If the shade is
too hard to raise or lower, then decrease the cord tension. See “Adjust the
Tension, If Necessary” on page 9.
Troubleshooting
