Hunter Douglas Applause Honeycomb Installation Operation Care Download Page 14

Page: 14 / 16

CARE

Removing the Shade, If Necessary

Specialty Brackets

■

Push the rail against the brackets to
release the rail from the latch,then lift
the rail out of the brackets.

Cleaning Procedures

Hunter Douglas Duette

and Applause

Honeycomb Shades are made of anti-static,

dust-resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following
cleaning options are available.

Dusting

■

Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.

Vacuuming

CAUTION:

Do not vacuum Elan

fabrics.

■

For deeper cleaning, vacuum gently with a brush attachment.

Compressed Air/Hair Dryer (Cool Setting)

■

Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off shades.

Spot-Cleaning

CAUTION:

Do not spot-clean Alexa, Alexa Metallic

™

, Apollo

™

, Calypso

™

, Commercial, Elan,

Applause Esprit

™

, India Silk, Jardin, Leela, Macon

™

, and all Batiste fabrics.

■

Prepare a solution of warm water and a mild detergent.

■

Dampen a clean cloth in the solution and wring it out.

■

Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.

■

Allow the shade to dry in the completely lowered (or closed) position.

Rail

Bracket

Front

Latch

Summary of Contents for Applause Honeycomb

















Search results

Summary of Contents for Applause Honeycomb

Reviews:

Related manuals for Applause Honeycomb

Brands by name

Popular brands

Hunter Douglas Applause Honeycomb, Installation Operation Care

Search results

Summary of Contents for Applause Honeycomb

Reviews:

Related manuals for Applause Honeycomb

Brands by name

Popular brands