Hunt HNR-3016GN, User Manual, Page: 28 / 57

22
Procedure How to upgrade system firmware by using USB memory stick
1) Put USB thumb-drive which was formatted by FAT/FAT32 in any USB port of NVR
that shall be compatible with USB 2.0 version
2) Once the system detects the thumb-drive, user can see a brand or model name
in “DEVICE” after pressing “SCAN” button.
3) Select NVR name and version to be applied, and then click “OK” to confirm.
(*) It is not allowed to use the partitioned and/or password-encoded USB memory.
VIDEO SIGNAL
It shows current setting video signal.
IP ADDRESS
It shows current setting value of IP address.
User can change it in Network setting menu.
MAC ADDRESS
It is the unique identity number for each system and cannot be changed.
DISPLAY
User can set sequence dwell time, resolution, OSD display on the monitor as below picture.
SEQUENCE
User can set dwell time for sequence display.
Display Resolution
User needs to set the proper resolution in accordance with the monitor resolution.