![background image](http://html1.mh-extra.com/html/hunt/hnr-3016gn/hnr-3016gn_user-manual_2184301027.webp)
21
REMOTE ID
User must setup REMOTE ID to match with the ID setting of IR remote controller, if user wants to use it
to control NVR.
Note [How to setup the ID # in IR Remote Controller]
1) Keep pressing ID selection button for about 5 seconds.
2) Set the ID number by pressing numeric button on IR Remote Controller.
ID number is available from 000 up to 255.
3) You have to press numeric button as three-digit number format.
For example, press “000” for 0, “023” for 23, “234” for 234.
When the ID at the remote controller is inputted and it can communicate with the NVR correctly, NVR
sounds beep once at the first time.
VERSION
Current firmware version & MCU(H/W) version of the NVR can be checked.
By clicking UPGRADE button, user can upgrade firmware.
UPGRADE FIRMWARE
User can easily upgrade the system firmware via DVD/CD/USB Memory Stick/FTP server
Caution
Do not click CANCEL button during firmware upgrade. It may cause serious
damage on the system.
Do not turn off the power of the NVR. It may cause serious damage on the system
and NVR may not be turned on after that.
The setting value might be changed to that of factory default in case that there are a
lot of changes between new firmware and existing firmware in functions, etc.
Therefore, it is recommended to check the setting value and operating condition of
the NVR after firmware upgrade.
Summary of Contents for HNR-3016GN
Page 6: ......