Hunt Electronic HVRM-S400E, Installation Manual

Page: 34 / 57

34
>> TIME SYNC
This setting is used for time synchronization over the network. HVRM-S400E can be synchronized by setting
them up as a client for an SNTP server. The HVRM-S400E can also be set up to act as a local time server, when
it is configured in SNTP server mode
>>> NETWORK TIME SERVER
• Select On to allow the HVRM-S400E to synchronize time either as a client or as a master.
>>> SERVICE MODE
• Select Client to allow the HVRM-S400E time setting to be synchronized by a network time server.
• Select Master to allow the HVRM-S400E to act as a network time server and send its time to other HVRM-
S400E to synchronize them.
>>> SERVER IP ADDRESS
• Enter the IP address of the network time server.
• This network time server can be either a different HVRM-S400E, a computer or a server in the network.
The time is checked and synchronized with the network time server once every hour.
>>> SYNCHRONIZE
• When this button is pressed, the time is synchronized with the network time server and other HVRM-S400E
immediately