manualshive.com logo in svg

hune H-200, User Manual

Share
Download
hune H-200 User Manual Download Page 65

cursor is placed on AM/PM, press A key to become AM, and press P key to become PM. Decide the 

value in Sync mins/Date Format/Time Format field with Left/Right key.   

Then, press Enter key to save the changed value and check the changed current time in the

 

standby screen.

 

 

9.4.2 Display Settings 

Select 2. Display Settings of Figure Prefs-7 to change the size of Font or LCD Contrast.

 

 

 

 

 

<Figure Prefs-9>   

 

*Font 

Select the size of font you want with Left/Right Key and press Enter to save. You may press Esc to cancel. 

 

*Contrast 

It is used to adjust LCD Contrast. Adjust contrast with Left/Right key as shown in Figure Prefs-9 and 

press Enter key to set the value. You may press Esc to cancel.

 

 

9.4.3 Owner Information 

It is to save simple information of Device user such as name and phone number. As shown in Figure 

Prefs-10, enter the text you want and press Enter key to save. 

 

 

 

   

<Figure Prefs-10>

 

Max character : 

27 

Summary of Contents for H-200




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands