hune H-200, User Manual

Page: 33 / 91

l
Battery Charging Indicator
Charging Complete Charging
Device LED Red light Green light
Charger Indicator Red light Green light
- The first charging must be for at least 2 hours in order to achieve optimum performance.
- Normally the device completes to charge the battery in one hour
- After complete charging, the device automatically checks the battery status during the
charger connector is installed on the device. Once it detect that the battery level is below full status, it
automatically recharge the battery.
- When you unplug your device from its charger, grasp and pull the plug, not the power cord.
- Your device turns off by itself if the battery is able to power no longer sufficiently
- You can send and receive message while charging your device.
- Standby time of battery may be reduced if device is in the No Network Service area
2.3 How to reset device
First, uncover rubber cap on the bottom of device and find reset switch which is colored blue. And
then, push reset switch to the right and return to the left again by using pointed tool.
Reset Switch Serial Port
2.4 How to turn on backlight
Press Power Button for 2 sec to turn on backlight (Device must be turned on first)
2.5 How to lock keyboard
If you want to lock all keyboard, pull hold switch to down.
To exit, pull hold switch up.