24 of 35
01115009A _9
Paracube
®
Micro – Instruction Manual
6.4
Product Failure During Warranty
Hummingbird will repair or replace free of charge any sensor that fails whilst under
warranty, providing the root cause of failure is due to faulty materials, design or
manufacture. Failures due to misuse will not be considered for replacement under
warranty. Examples of failures resulting from misuse include, but are not limited to,
failures due to excessive flow or pressure and failures due to contamination or
condensate in the cell. Under these conditions Hummingbird reserves the right to
charge for replacement.
6.5
Product Failure Out of Warranty
Hummingbird will always examine sensor returns on request to determine the root
cause for a reported product failure, but accept no obligation to replace the sensor.
6.6
Maintenance and Servicing
Maintenance and servicing of the Paracube
®
Micro is limited to changing of the ‘O’ ring
seal and/or the adaptor plate kit.
6.7
Decontamination
The Paracube
®
Micro has been designed such that the gas port may be cleaned using
‘Steriwipes’ or similar as part of a regular maintenance schedule. Ensure filter
assembly is in place prior to wiping.
Note:
It is important that only general purpose alcohol based cleaning agents be
applied to the external surfaces of the Paracube
®
Micro.
Note:
Contaminated cells should be disposed of in accordance with the local
Environmental and Health & Safety regulations.
Hummingbird reserves the right to refuse to examine product returned without a
completed Decontamination Clearance Certificate.
Appropriate anti-static handling procedures should be applied and returns must be
packed in the original material to prevent damage during transport.
WARNING USE – No. 3
A
LL PARTS OF THE SENSOR INCLUDING FILTER ASSEMBLIES AND SEALS SHALL
BE DECONTAMINATED AND RETURNED WITH A
D
ECONTAMINATION
C
LEARANCE
C
ERTIFICATE
,
BEFORE
H
UMMINGBIRD WILL EXAMINE THE
PRODUCT
.
