11 of 35
01115009A _9
Paracube
®
Micro – Instruction Manual
Method 2
Secure the sensor using the four clearance holes located at the corner of sensor
moulding, again shown in Fig. 4. This method recommends using M2 hexagon socket
cap screws in conjunction with a “Ball ended” Allen key due to the shallow approach
that must be made by the fixing tool. To ensure that a reliable gas tight seal is
produced, observe Caution No. 3.
Fig. 4
CAUTION – No. 3
To ensure a gas tight seal the fixing screws should be tightened to
a torque value of 0.30 to 0.35 Nm.
CAUTION - No. 2
When using method 1 to install the Paracube
®
Micro it is important
to note that the maximum insertion depth for the fixing screws is
3.5mm.
