Humminbird PiranhaMAX 165 Installation And Operation Manual Download Page 49

Page: 49 / 75

How to Use the Menu System

Review the instructions below to understand how to use the menu system.

1. Open the Menu System

Press the POWER/MENU key.

2. Select a Menu Option

Press the UP or DOWN Arrow key to select a menu option.

NOTE

: Available menu options will be determined by the view

currently displayed on-screen. See

Views

for more information.

The menu name will be highlighted, indicating the menu
is active, but the menu option is inactive.

3. Activate a Menu Option and Adjust Settings

Activate a Menu Option:

Press the CHECK/ENTER key to

activate the selected menu option.

The menu option will be highlighted, indicating the menu
option is active and changes can be made to the menu
setting.

When the menu
name is gray, the
menu is currently
inactive.

Active Menu Option

When the menu

option is white,

the menu option

is active.

When the menu
name is white, the
menu is currently
selected.

Inactive Menu Option

When the menu

option is gray,

the menu option

is inactive.

How to Use the Menu System

Summary of Contents for PiranhaMAX 165












































































Search results

Summary of Contents for PiranhaMAX 165

Reviews:

Related manuals for PiranhaMAX 165

Brands by name

Popular brands

Humminbird PiranhaMAX 165, Installation And Operation Manual

Search results

Summary of Contents for PiranhaMAX 165

Reviews:

Related manuals for PiranhaMAX 165

Brands by name

Popular brands