Setup Menu Tab
74
Depth Offset
(Advanced)
Settings: Various, see below.
Depth Offset
will adjust the digital depth readout to indicate depth from the waterline or boats
keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth
from the waterline. Enter a negative vertical measurement from the transducer to keel to read the
depth from the keel.
The available Depth Offset settings are determined by your Humminbird model as follows:
•
HELIX 5:
-10.0 to +10.0 feet or -3.0 to +3.0 meters; Default = 0.0, or Off
•
HELIX 7:
-10.0 to +10.0 feet or -3.0 to +3.0 meters (International Models only);
Default = 0.0, or Off
Temp. Offset
(Advanced)
Settings: -10.0 to +10.0 degrees, Default = 0.0, or Off
Temp Offset
will adjust the temperature readout by the amount entered.
Speed Calibration
(Advanced, with Speed paddlewheel only)
Settings: -20% to +20%, Default = 0%
Speed Calibration
will adjust the speed readout by the amount entered. This menu option is
available if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once.
NOTE:
The availability of the digital readout information corresponds with the view selected and the
accessory attached.
Sonar View
readout 1
1
readout 2
2
1
2
4
3
5
readout 3
3
readout 4
4
5
readout 5
Summary of Contents for HELIX 5 DI
Page 1: ......
Page 6: ......
Page 49: ...Sonar Menu Normal Mode HELIX DI Sonar Menu Advanced Mode HELIX DI 43 Main Menu...
