Humminbird 797c2 SI/NVB Operation Manual Download Page 138

Page: 138 / 189

128

Temp. Alarm

Temp. Alarm

sounds when the water temperature

detected by the Fishing System reaches the Temp. Alarm setting, which is either
set in degrees Fahrenheit or Celsius

[International Models only]

. For example, if

the Temp. Alarm is set to 58 degrees Fahrenheit, and the water temperature falls
from 60 degrees to 58 degrees, the Temp. Alarm will sound. Similarly, if the water
temperature rises from 56 degrees to 58 degrees, the Temp. Alarm will also sound.

To change the Temp. Alarm setting:

1. Highlight Temp. Alarm on the Alarms main menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp.

Alarm setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)

Summary of Contents for 797c2 SI/NVB






























































































































































































Search results

Summary of Contents for 797c2 SI/NVB

Reviews:

Related manuals for 797c2 SI/NVB

Brands by name

Popular brands

Humminbird 797c2 SI/NVB, Operation Manual

Search results

Summary of Contents for 797c2 SI/NVB

Reviews:

Related manuals for 797c2 SI/NVB

Brands by name

Popular brands