Humminbird 797c2 SI/NVB Operation Manual Download Page 130

Page: 130 / 189

120

Chart Detail Level

Chart Detail Level

allows you to select how much

chart detail you want displayed on the Navigation Views.

Basic

shows land

areas, ports, obstructions and restricted areas.

Navigation

shows navaids,

landmarks, ferryways and navigation routes in addition to the Basic
information.

Underwater

shows depth contours, fishing areas, underwater

wrecks, tides and currents in addition to the Basic and Navigation information.

All

shows roads, buildings, railways, and other notations in addition to the

Basic, Navigation and Underwater information.

To change the Chart Detail Level setting:

1. Highlight Chart Detail Level on the Chart main menu.

2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Chart

Detail Level setting. (Basic, Navigation, Underwater, All, Default = All)

NOTE:

Some chart details are only available with optional-purchase MMC/SD cards.

Summary of Contents for 797c2 SI/NVB






























































































































































































Search results

Summary of Contents for 797c2 SI/NVB

Reviews:

Related manuals for 797c2 SI/NVB

Brands by name

Popular brands

Humminbird 797c2 SI/NVB, Operation Manual

Search results

Summary of Contents for 797c2 SI/NVB

Reviews:

Related manuals for 797c2 SI/NVB

Brands by name

Popular brands