Humminbird 587ci Combo Operation Manual Download Page 107

Page: 107 / 143

Set Map Offset

(Advanced)

Set Map Offset

allows you to change the map offset used by your Fishfinder.

The Set Map Offset menu option is available when User Mode is set to
Advanced (see

Main Menu: User Mode

NOTE:

The Map Offset will be applied to all maps and not just the map that requires

the correction. The Map Offset should be cleared if a different map is to be used.

To change the Map Offset setting:

1. Press the 4-WAY Cursor Control key to activate the cursor and move it

to the location where the Map Offset will be applied.

NOTE:

The cursor must be active in order for this procedure to work.

2. Make sure the User Mode is set to Advanced, then highlight Set Map

Offset on the Navigation main menu.

3. Press the RIGHT Cursor key to set the Map Offset. The Confirm dialog

box will appear. To confirm the setting, press the RIGHT Cursor key
once more. To cancel the setting, press the LEFT Cursor key.

NOTE:

If the cursor was not active before you began this procedure, an error message

will appear. Exit the menu, set the cursor, then try again.

Course Projection Line

allows you to display or hide

an arrow extending from the bow of the boat that projects your current course, and
shows where the boat will go if you continue on your present course.

To change the Course Project Line setting:

1. Highlight Course Projection Line on the Navigation main menu.

2. Press the LEFT or RIGHT Cursor keys to change the Course Projection

Line setting. (Hidden, Visible, Default = Visible)

Navigation Menu Tab

Summary of Contents for 587ci Combo
















































































































































Search results

Summary of Contents for 587ci Combo

Reviews:

Related manuals for 587ci Combo

Brands by name

Popular brands

Humminbird 587ci Combo, Operation Manual

Search results

Summary of Contents for 587ci Combo

Reviews:

Related manuals for 587ci Combo

Brands by name

Popular brands