32
Introduction to Navigation
Use your 300 Series™ Fishfinder to mark waypoints at areas of interest and to
navigate to those waypoints via a savable route. A route represents the shortest
intended distance between waypoints. You can also view and save tracks,
which represent the actual path of the boat.
Waypoints, Routes, and Tracks
Waypoints
are stored positions (latitude, longitude) that allow you to mark
areas of interest or navigation points (i.e. a marker buoy, dock, or fishing hole).
Your Fishfinder can store up to 3000 waypoints.
Routes
link two or more waypoints together to create a path for navigation and
are used in trip planning. You can link individual waypoints together by using the
GOTO key. A route represents your intended navigation and shows the shortest
path from each waypoint to the next. As you travel a route, staying on the route
line is the most efficient way to get to your destination, although you should
always look out for obstacles not shown on the chart. Your 300 Series™
Fishfinder can store up to 50 routes that can each contain up to 50 waypoints.
Tracks
consist of detailed position history and are displayed as a breadcrumb
trail of trackpoints. The Current Track shows the position history since the unit
was powered up (maximum of 20,000 trackpoints displayed). You can clear the
Current Track or save it at any time. Your 300 Series™ Fishfinder can store up
to 50 saved tracks, each containing 20,000 trackpoints. The current track
represents your actual path so far.
Introduction to Navigation
