Page 45
10.3 Replacing the printer paper roll
To do so:
The integrated printer and a paper roll is
required. Both are included in the equipment pack-
ages: Data package or ATRO package.
1. Lift the tab of the printer all the way up
(figure
66
).
»
The printer cover pops open.
2. Remove the empty paper roll.
3. Place a new, opened paper roll into the printer
(figure
67
).
4. Keep hold of the beginning of the paper roll
and close the printer cover.
»
The printer is now ready to use again
(figure
68
).
10.4 Checking the calibration
The device’s calibration should be checked regularly.
To do so:
The test medium (figure
69
) for checking the
measuring device is required. The device's calibration check
is described in a separate operating manual.
66
67
68
69
Summary of Contents for BMA-2
