Page 17
5.
The measuring process
5.1
Preparing a measurement
To do so:
The display has to show the measuring window
(figure
9
).
1. Open the drawer of the device by lifting and pulling the
handle towards you (figure
10
).
2. Take out the measuring chamber.
3. Completely fill the measuring chamber with the material
being measured. Use the included plastic bucket and fill
the measuring chamber from the side with the metal plate
(figure
11
).
4. Wipe off the material at the upper edge of the measuring
chamber evenly.
5. Hang the filled measuring chamber in the drawer (figure
12
).
»
The handle and the suspension of the measuring chamber
must hang in the plastic brackets of the drawer.
6. Close the drawer. If necessary, push its handle downwards to
fully close it.
5.2
Taking a measurement
1. Select the required product type (see
"6. Product types"
) by
pressing the
or
button
Or
2. Press the
or
button for 3 seconds.
»
The display will now show the product type over-
view (figure
13
).
3. Select the required product type (
Woodchips,
Coarse chips, Softwood chips, Softwood coarse, Fine
woodchips, Pellets, Miscanthus, Shavings Softwood,
Sawdust Softwood, Sawdust Hardwood, Corn cob, Empty 1
).
To do so, press
or
and confirm by pressing
Or
9
10
11
12
13
Summary of Contents for BMA-2
