45
If your test requires motor control, as in our example here, choose
MOTOR CONTROL. When you select MOTOR CONTROL, the screen
will change to show the Select Motor Parameters, see above. For DI-
RECTION, use the field drop-down menu
(1)
to select up or down. In
our example we have chosen the direction as Up and we have set the
SPEED
(2)
to 0.002 in/min., which would be determined previously
in the consolidation stage of the test. In this test example there is no
SEAT LOAD
(3)
, unlike a CBR test, which would require one.
Use the Return Home
(4)
check box in the lower left-hand corner if you
would like the motor to return to its starting position after the test is com-
plete. If not, the motor will remain where it is when the test is complete.
Once you have chosen your test inputs, click on the Right Arrow button
(5)
in the bottom right-hand corner. You will see the following screen.
1
2
3
4
5
Summary of Contents for HM-5320.3F
Page 1: ...product manual 05 17 Elite Series Data Loggers HM 5320 3F HM 5330 3F ...
Page 2: ......
Page 25: ...Equipment Setup 25 ...
Page 41: ...Test Setup 41 ...
