43
Select USER DEFINED
(1)
for all triaxial tests, such as Unconfined
Compression, Consolidated Drained and Undrained and Unconsol-
idated Undrained, as well as any custom tests you would like to set
up.
In our example here, we will be setting up a triaxial test, so we would
choose USER DEFINED.
Test Setup Wizard – Template
If you are just beginning to use your new machine, there will be no
templates, which have been saved, so at this point, clicking on the
template button will provide no templates to choose from.
To create templates, you essentially save a completed test as a
template. Once you have completed some tests and save them as
templates, they will then show up when you press the template but-
ton. This will allow you to quickly repeat tests with the same parame-
ters, as well as a fast way to create new tests by choosing a template
and then changing some of the parameters.
Test Setup Wizard – Select Test Inputs
Once you have chosen the type of test you’d like to run, for our
example we have chosen USER DEFINED, click on the Right Arrow
button
(2)
in the bottom right-hand corner. You will see the following
screen. On this screen, choose which test inputs available you would
like to use for your test.
Note: All inputs may not be available for testing. An unavailable
input is either all ready in use by another test or the input is un-
calibrated.
1
2
Summary of Contents for HM-5320.3F
Page 1: ...product manual 05 17 Elite Series Data Loggers HM 5320 3F HM 5330 3F ...
Page 2: ......
Page 25: ...Equipment Setup 25 ...
Page 41: ...Test Setup 41 ...
