Humboldt HM-5250.3F, Product Manual

Page: 37 / 40

37
General Warnings
Safety Warnings
Operators should take care to operate this machine under maximum load restric-
tions. The machine is programmed at the factory to provide safety shutdown if
the upper or lower maximum travel is exceeded, as well as if the upper instrument
calibration is exceeded.
Electrical Warnings
Typically, there is no reason for the operator to open the machine. However, if the
customer’s engineers attempt to change settings to the circuit board connected to
the back panel, the machine must first be unplugged. Unplugging the internal con-
nection to the back panel circuit board while the machine is under power will result in
permanent damage to the circuit board.
Important Notice
The information contained herein is supplied without representation or warranty of
any kind. Humboldt Mfg. Co. therefore assumes no responsibility and shall have no
liability, consequential or otherwise, of any kind arising from the use of the described
equipment contained in this manual.
Updated Products
The manufacturer reserves the right to change or modify product design or construc-
tion without prior notice and without incurring any obligation to make such changes
and modifications on products previously or subsequently sold.
Fitness for Application
The manufacturer makes no recommendations or claims regarding fitness for applica-
tions other than the specific tests as defined in this User Guide.
Unpacking
Initial inspection should include checking for physical damage during shipping and
obvious external damage to the product.
Package contents are defined by your packing list. Each Loader is configured accord-
ing to customer specifications. In your inspection, make certain that the contents of
your shipment match the documentation provided by your packing list.
Place unit on a flat, smooth surface and use leveling feet (supplied) and a bubble
level to ensure that the unit is level side-to-side and back-to-front.
Warranty
Humboldt Mfg. Co. warrants its products to be free from defects in material or
workmanship. The exclusive remedy for this warranty is Humboldt Mfg. Co., factory replace-
ment of any part or parts of such product, for the warranty of this product please refer to Hum-
boldt Mfg. Co. catalog on Terms and Conditions of Sale. The purchaser is responsible for the
transportation charges. Humboldt Mfg. Co. shall not be responsible under this warranty if the
goods have been improperly maintained, installed, operated or the goods have been altered
or modified so as to adversely affect the operation, use performance or durability or so as to
change their intended use. The Humboldt Mfg. Co. liability under the warranty contained in this
clause is limited to the repair or replacement of defective goods and making good, defective
workmanship.