24
Installation and Equipment Setup
Electrical Connections
The HM-5250 is equipped with an internal digital switching power
supply, which allows it to be used with most power configurations
throughout the world. The unit is supplied with an IEC electrical
cord with a standard 110V plug.
The HM-5250 arrives ready for operation. Attach the supplied IEC
electrical cord to the machine and plug into a standard wall recep-
tacle for use in the United States. For locations other than the U.S.,
replace the supplied electrical cord with an IEC cord that has the
correct plug for your application. The supplied cord can also be
used by cutting the standard plug from the cord and attaching the
correct plug.
Power Switch
The Power Switch is located above the electrical cord inlet. The
Fuse Compartment is located between the electrical cord inlet and
the Power Switch. The HM-5250 uses a 8.5 amp fuse. To begin
operation, attach the supplied electrical cord, plug it in and press
the Power Switch.
Fig. 1 Power Switch
Fuse Compartment
Summary of Contents for HM-5250.3F
