7. Inert the Supervisor ID card from the HUBI-QUAN Pro box to the card slot which is located on the right side
of HUBI-QUAN PRO. Once press button after inserting ID card, it will identify the ID and show main
menu.
8. Printing paper is included in product package. There is no need to insert additional paper. The following is
the procedures to insert new printing paper once it runs out.
Procedure for printer paper replacement
① Open the cover of the thermal printer on the right upper corner of
HUBI-QUAN Pro by pulling the cover with two fingers on each side
of it. The printer status LED will light up red at this point.
② Carefully flatten both side of the paper and place it like the
picture, the close the cover. The printer status LED should light up
green to show that the paper is correctly in place.
(Press FLED button to check if the paper is coming out the
machine properly.)
