Human HumaStar 300, Service Manual

Page: 259 / 405

test Program
241
teSt aRM
This test activates a random programmed
ARM rotation starting from HOME position.
Enter the number of cycles into window:
“REAGENTS TESTS REPEATS"
Before running this test bring
Probe and Plate into Home posi-
tion.
(1)
16.3.1
Move
diluteR
3000
This test moves the Diluter Piston, to run
this test enter the volume into window:
“µL / 10“.
Maximum value that can be
entered is 6000 µL/10. (3)
16.3.1
teSt
diluitoRe
3000
This test activates a programmed ran-
dom movement of the Diluter Piston, the
volume is entered in window: “µl / 10“ and
for a number of cycles indicated in: “REA-
GENTS TESTS REPEATS“..
Maximum value that can be
entered is 6000 µL/10.
3)
16.3.1
aiR puMp
To run the AIR PUMP test, activate at the
same time PWR ON and AIR [

] in the Cu-
vette and Sampling Systems.
To activate the PUMP click on key [

]
To STOP the pump – click on key [O]
At the end, press key [O] to the
test.
p2 puMp
2000
Before starting this test, enter the volume
in window “ µ l “ (example 2000 µ l).
Click on [P2] to activate the pump to dis-
pense the programmed volume of 2000µl.
Before running this test position:
HOME
MOVE Arm on wash
Activate pump P7 to move the
liquid to Waste.
p4 puMp
To activate the pump,- click on key [

]
To stop the pump – click on key [O]
During the execution of this test
activate pump P7 to move the
liquid to waste.
MiXeR
Click on key [MIXER] to activate the mixer
(fixed time 3 sec.)