human care FL180, User Manual

Page: 15 / 107

15
www.humancaregroup.com
ASSEMBLY OF HANGER BAR
1. Take the hanger bar from the box, and test if
the clip at the bar ends function well.
2. Install the hanger bar at end of the boom.
NOTE—ENSURE the hanger bar is securely
installed before usage.
ALWAYS CHECK THE FOLLOWING BEFORE
OPERATION
• The mast is fully locked into position
• The legs of the lift open and close
satisfactorily.
• The red emergency stop button, located
on the rear of the control box, is in the OFF
(out) position.
• Push up and down buttons on the handset
and confirm the boom rises and lowers.
• Fit the power pack to the lift and make sure
the latch holding the pack in place is fully
engaged. “Click” in place.
ENG
Assembly FL320
ENG