Huka Skwirrel II, Service Manual

Page: 45 / 74

45
10.2 replacing the indicator light bulb.
step 1.
Remove the upper and lower screw from the indicator glass.
step 2.
Remove the glass form the indicator frame.
step 3.
Remove the broken bulb and replace it by a new one.
10.3 replacing the rear light bulb.
step 1.
Lift off the rear light glass by lifting the bottom part up.
The glass will jump out of its fitting.
NOTE:
To remove the lower screw you should use a short
screw driver. To reach this lower screw it is also
possible to bend the light frame a bit.
NOTE:
The mounting of the new part will take place in reverse
order.