37
9.2 replacing the seat lift down actuator.
step 1.
Remove the top cover of the chassis.
step 2.
Removed the split pen form the actuator head at the front
of the actuator.
step 3.
Loosen the nuts at from the mounting bolt at the rear end of
the actuator.
step 4.
Put a safety strap between the seat frame and the rear and
of the chassis.
WARNING:
If the seat lift arm is in its highest position, you can
take the pin out without any problem. Should the
seat lift NOT be in its highest lowest position, the
actuator is still lifting the seat lift. If you then remove
the pin, the seat lift will sudden drop down. This can
cause a hazardous situation. Be aware of this risk.
Summary of Contents for Skwirrel II
