Chapter 4
•
Using the Web UI
H61798
Revision E
27
The usage statistics are only an estimate and do not reflect actual billing
system details.
Settings page
The Settings page provides a set of subpages for the configuration of various
parameters of the mobile terminal:
•
General Setup
•
IP Address/DHCP
•
Ethernet Security
•
Wi-Fi
•
Security
•
Outbound Filters
•
Port Forwarding
General setup
This subpage allows the user to configure general parameters of the Hughes 4201. A
description of each item is as follows:
Mobile Satellite Terminal Startup:
•
Auto Power On:
When enabled, the terminal will automatically power on
when connected to the AC/DC adapter.
•
Antenna Pointing:
This parameter is used if the terminal is permanently
mounted and you want to bypass antenna pointing on subsequent power ups.
For permanent installations it is also recommended to enable “Auto Power On”
to avoid having to use the power button.
Access Point Name:
Allows you to configure the APN if needed.
Language:
Allows the user to select between English and French by clicking the
drop-down arrow, select the language and then click the
Apply Changes
button.
IP Address/DHCP Settings
Mobile Satellite Terminal Local IP Address:
This section allows the user to change
the local IP address of the terminal from the default
192.168.128.100
IP address. All
four octets are available to change. Once the local IP address is changed on this page
and applied, the first 3 octets of the DHCP address range will also change
automatically.
DHCP Server:
Allows the DHCP server in the UT to be turned on or off by checking
the Enable box.
DHCP Address Range:
This allows the user to set the range of DHCP addresses that
are given out by the UT to connected TEs.
