26
Chapter 4
•
Using the Web UI
H61798
Revision E
Chapter
4
Using the Web UI
Accessing the Web UI
The Hughes 4201 includes an internal Web User Interface (Web UI). To access the
Web UI, open your favourite web browser and type in the internal IP address of the
terminal, e.g.,
http://192.168.128.100
. The Web UI opens up to the
Home
or
Terminal Status
page.
Along the top of all Web UI pages are icons representing the categories of available
subpages;
Home, Connections, Telephony, Settings
and
Support
.
Home page
The Home page shows the current terminal status and allows you to set up your
initial data connection.
On the left side of the page is the
STATUS
bar. These items are updated
automatically when the status of any item changes.
1.
Connection:
This field indicates whether you are registered with the Strigo
network. It also shows the receive signal strength.
2.
Position:
This field displays the current position status. If the terminal
acquired a GPS fix, it will display the Latitude, Longitude, Fix Quality, and the
last time the GPS position was updated. Time displayed is UTC time.
3.
Terminal Properties:
This field indicates if Wi-Fi is on, whether security is
enabled or not, it shows the battery status and whether mains power is
connected.
Once connected to the network, the Terminal Status page will show that the UT is
registered with the network. In the middle of the
Home
page it will show that the
Data
Connection is established along with the TE’s local IP address
and the global IP
address.
A list of all the connected devices on LAN and Wi-Fi is displayed.
Note:
If the WebUI is accessed while the terminal is in antenna pointing mode or in
the process of establishing the satellite link, then this will be indicated on
the home screen as well.
While in pointing mode the terminal displays signal strength only in the
antenna pointing status window. The signal strength bar in the left status
window becomes active after exiting antenna pointing.
Usage statistics
This page shows the statistics of transmitted and received data. The Trip statistics
can be reset, but the Lifetime statistics cannot be reset.
