• Short press to turn ON/OFF the laser unit.
The power indicator LED (17) will light up in red.
• Horizontal line and self-leveling mode turned on in default after
power on.
Positioning Laser Lines
Turn ON/OFF the Laser Tool
The adaptable metal base allows precise positioning of the laser
lines.
Alignment with motion base
Alignment with vernier adjustment
A.
Undo threaded adapter lock screw (11).
B.
Remove 5/8" threaded adapter(5) and
screw it into the 5/8" tripod thread(4) of the
laser unit.
C.
Place the laser unit with 5/8" threaded
adapter(5) on the metal base and tighten
the lock screw (11).
5
11
-8-
D
Note:
！
To secure the laser unit correctly, the fixing screw(D) must be
snapped into the groove in the laser unit.
2.
1.
3.
Summary of Contents for DT03CG
