Huepar DT03CG, User Manual

Page: 12 / 100

Note:
！
Short press button to switch between X and Y axes.
-11-
C. Adjusting both axes:
Step 3:
Keep pressing and holding the or button to adjust
slope. When the lasers blink, the maximum slope range (3.5°) has
been reached.
Step 1: Press and hold the button for ≥3 seconds until the slope
function LED
（
18
）
flashes rapidly . The X-axis slope adjustment is
now available.
Step 2: Keep pressing and holding the or button to adjust
slope in X axis. When the lasers blink, the maximum slope range
(3.5°) has been reached.
Step 4:
Keep pressing and holding the or button to adjust
slope in Y axis. When the lasers blink, the maximum slope range
(3.5°) has been reached.
Step 3: Short press the button to switch to Y axis. The slope
function LED (18) flashes slowly . The Y-axis slope adjustment is now
available.
3 sec. 1 sec.
3 sec. 1 sec.