Item no. 11050, 11051
As of 10/11
Page 4/8
HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
www.hudora.de
EN
INSTrUcTIoNS oN ASSEmBLY AND USE
coNGrATULATIoNS oN
PUrcHASING THIS ProDUcT!
Please read these instructions carefully. The instructions are an integral
component of the product. Therefore, please store them and the packa-
ging carefully in case questions arise in the future. Please always include
these instructions when handing on the product to a third party. This
product must be assembled by an adult. This product is not designed
for industrial use. The use of the product requires certain capabilities
and skills. Always adjust according to the age of the user and use for the
purpose it has been designed for.
TEcHNIcAL SPEcIFIcATIoNS
Item:
HUDORA Kick Wheel
Item number:
11050, 11051
Item weight:
2,3 kg
Dimensions when assembled: ca. 61 x 57 x 27 cm
Maximum user weight:
50 kg
coNTENTS
1 x Kick Wheel
1 x Manual
Other items included are meant to facilitate safe transportation and are
not required for the installation and use of the product.
SAFETY INSTrUcTIoNS
• This product has been designed for children aged from 2 to 6 years
and is suitable only for smooth, paved surfaces.
• The Scooter is to be used by one person at a time.
• Maximum user weight has been mentioned in the Technical Specifica-
tions.
• Please pay attention that your child wears the corresponding protec-
tive clothing (helmet) and does not ride the scooter without shoes.
• Do not allow your child to ride at dusk, at night or in poor light
conditions. So that your child and others are not endangered, do not
allow your child to ride on roads and in thoroughfares, on slopes and
hillsides. Avoid riding close to stairs and open waters.
• Check the Scooter before every ride to make sure that all parts are still
fixed correctly and the Scooter works as it should.
• Pay attention that your child keeps both hands tightly on the handlebar
to have control over the Scooter.
• The scooter should not be used on sensitive surfaces. Such areas
should where expedient, be covered with old carpets.
• Warnings! Protective equipment should be worn (helmet). Not to be
used in traffic. 50 kg max.
INSTrUcTIoNS oN ASSEmBLY
The scooter will be delivered to you in a transport state (folded) (Fig. 1).
You will have to proceed as follows
in order to set up the scooter for use:
Turn the clamp upwards in an anticlockwise direction to free the locking
mechanism (Fig. 2 and Fig. 3). Then subsequently fold the handlebar
upwards (Fig. 4) and turn the clamp in a clockwise direction until the
locking mechanism snaps into place (Fig. 5).
You will have to proceed as follows
in order to again transform the scooter into a transport state:
Turn the clamp downwards in a clockwise direction and concomitantly
pull the handlebar towards you, in order to free the locking mechanism
(Fig. 6). Fold the handlebar downwards (Fig. 7) and turn the clamp in the
clockwise direction until the locking mechanism snaps into place (Fig. 8).
cArE AND mAINTENANcE
Use a dry or damp cloth only to clean the product; do not use special
cleaning agents! Check the product for damage or traces of wear and
tear before and after each use. Store the product in a safe place where
it is protected from the elements, cannot be damaged, and cannot injure
anyone. For your own safety, please use original spare parts only. These
can be sourced from HUDORA. Do not make any structural changes. If
parts become damaged or if sharp edges or corners should develop, the
product may not be used any more. If in any doubt, please contact our
service team (http://www.hudora.de/service/).
DISPoSAL ADVIcE
At the end of the product’s life, please dispose of it at an appropriate coll-
ection point provided in your area. Local waste management companies
will be able to answer your questions on this.
SErVIcE
We make every effort to deliver faultless products. If faults do arise how-
ever, we put just as much effort into rectifying them. Therefore, you can
find numerous information on the product, replacement parts, solutions
to problems and lost assembly manuals at http://www.hudora.de/a/ZY.
All images are examples of the design.
