Hudora 64425, Instructions On Assembly And Use

Page: 16 / 32

EN INSTRUCTIONS ON ASSEMBLY AND USE
16/32
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Warning! Please read these instructions carefully.
The texts provide you with comprehensive advice and information, whereas the illustrations are
intended to provide you with a good overview during the assembly.
The instructions are an integral component of the product. Therefore, please store them and the
packaging carefully in case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled by an adult. This
product is designed for private/domestic use only. This product is not designed for commercial/in-
dustrial use. The use of the product requires certain capabilities and skills. Always adjust according
to the age of the user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: HUDORA First Trampoline 250
Item number: 64425
Maximum set-up dimensions: 2,50 m x 2,50 m x 2,40 m
Purpose: Trampoline for jumping in a private area.
WARNINGS! SPECIAL SAFETY INSTRUCTIONS
• Max. 100 kg
• For outdoor use only.
• The trampoline shall be assembled by an adult in accordance with the assembly instructions
and thereafter checked before the first use.
• Only one user. Collision hazard.
• Always close the net opening before jumping.
• Jump without shoes.
• Do not use the mat when it is wet.
• Empty pockets and hands before jumping.
• Always jump in the middle of the mat.
• Do not eat while jumping.
• Do not exit by a jump.
• Limit the time of continuous usage (make regular stops).
• Do not use in strong wind conditions and secure the trampoline.
• Only for domestic use.
• Follow the measures under „Maintenance and Storage“ as well as the instructions under „Safe
Use“. Non-observance of the aforementioned points can lead to serious hazards for the user.
• Sufficient clearance above the trampoline must be ensured. A minimum of 2 m is recommend-
ed. Remove all cables, branches and other potential hazards. The trampoline must be set up
only on a firm and level ground.
• The trampoline requires sufficient horizontal distance from things around it. Set up the tram-
poline away from obstructions such as walls, buildings, electrical lines, fences and play areas.
Ensure a free space of 2 m around its diameter.
• Do not eat and drink while using the trampoline.
• The net should be replaced every 3 years.
• WARNING! Not suitable for children under 36 months due to long cords! Strangulation Hazard.
• WARNING! Not suitable for children under 36 months due to lack of abilities. Risk of injury!
• Please replace the self securing nuts after loosening them as the self securing structure will be
damaged.
• In certain countries during winter period, the snow load and the very low temperature can
damage the trampoline. It is recommended to remove the snow and store the mat and the
enclosure indoors.
SAFETY INSTRUCTIONS
• Keep young children away while assembling to prevent any risk of strangulation from long
cords or of asphyxiation from small parts! For this reason, cut off cord ends to a maximum of 5
cm after the assembly.
• Position the trampoline on a level surface before using it.
• Use appropriate lighting in dark places.
• Do not place the trampoline on a concrete floor, a hard ground (rocky surface) or a slippery
surface. We recommend placing it on a lawn.
• Do not leave any object on the trampoline and remove anything that can hit the person jump-
ing on it.
• Used rain covers must be kept outside of the reach of children (choking hazard).
• Improper use or misuse of the trampoline is dangerous and can cause a serious injury!
• The person owning the trampoline and the person supervising the people on the mat are re-
sponsible for making the techniques and warnings mentioned in the user manual known to all
users.
• The trampoline must only be used in the presence of an experienced supervisor with relevant
expertise. Make sure that your children are always within sight while using the trampoline.
• The trampoline must be mounted and dismounted by climbing up and down.
• Get on and off the trampoline through the inlet in the safety net. Access and exit the trampo-
line by thereby climbing up and down respectively. Do not attempt to enter the trampoline by
crawling under the safety net.
• In order to mount the trampoline correctly, hold the frame with your hands and climb up or roll
on to the frame, over the springs and on to the mat. Always make sure that you hold the frame
with your hands while climbing up or down. Do not immediately climb on to the frame padding
and do not hold on to the frame padding. In order to dismount correctly, get to the edge of the
trampoline, hold the frame with your hands and climb down from the mat on the floor.
• Do not allow pets on the mat to protect it from cuts and damages.
• Do not wear clothing having drawstrings, loops and hooks. Buckles, if any, should not be hard
or have a rough surface.
• Do not use the trampoline under the influence of alcohol or drugs.
• Wind or air movements should be calm or slight when jumping. In the event of strong or stormy
winds the trampoline should not be used.
• The mat must not come in contact with sharp or pointed objects.
• Ensure that there is no one under the trampoline.
• Landing on head or neck can cause paralysis or death! Somersaults are not recommended as
they increase the risk of landing on head or neck.
• Not suitable for pregnant women.
• Make sure that the warning messages printed on the trampoline are readable when the user
enters through the safety net entrance.
• The trampoline is neither intended nor suitable to be buried into the ground.
• Recommendation for supervisors: Take care that the user frequently takes a break to avoid ex-
haustion and ensure full body control.
• When permanently irradiated with UV light, the material ages significantly faster. To avoid pre-
mature ageing and thereby extend the service life, you should always store the frame covering/
frame cushioning and jumping mat in a dry and dark place when not in use. Do not permanent-
ly expose the frame covering/frame cushioning and jumping mat to wind, moisture, extreme
temperatures or sunlight.
INSTRUCTIONS ON ASSEMBLY
Our special spring extender, delivered with this product, is required to set up the trampoline. When
you are not using the trampoline, it should be dismantled and stored away in the original pack-
aging. Please read the instructions on assembly once before assembling the product. You should
perform the assembly in pairs.
PRIOR TO THE ASSEMBLY
Make sure that all the parts listed in the parts list are present. In case you are missing parts, please
consult our service. Please use gloves to protect your hands. Before connecting, you should spray
or lightly grease all connections with contact spray. This extends the service life as well as eases
the assembly and subsequent disassembly.
STEP 1 - 5: ASSEMBLY OF THE SUPPORT GROUP AND THE FRAME
Follow the steps 1 through 5 according to the illustration. Make sure that the securing bolts always
securely engage. You can always view how the result of the particular assembly step must look
like, in the lower right hand corner. In steps 1 - 3, make sure that the holes on components 5, 6,
9 and 10 point to the middle of the trampoline. In steps 1 and 2 a rubber mallet can be used to
facilitate the assembly of components 9 and 10 with component 4.
STEP 6: ASSEMBLY OF THE JUMPING MAT
CAUTION – When fastening the springs, the tube joints can lead to bruising, because the trampo-
line is thereby stretched until it becomes taut.
a) Spread out the jumping mat (1) in the frame, with the printed side facing upwards.
b) Hook the springs (14) into the frame as shown in figures 6.1 through 6.3. Use the special spring
extender (19), to attach the spring to the jumping mat and to hook the springs into the frame,
in case you need more tensile force as in the case of the first spring. Hook in the spring until it
fully snaps, and press it down further, if the hook is not fully seated in the hole.
c) ATTENTION! Insert the springs as shown in Figures 6.4 - 6.6 first in a third circle or sixth circle
distance to avoid building up too much tension on one side of the mat. This is guaranteed if
you choose the first hole on the left of component 9 or 10. Now you can attach the remaining
springs in any order. In case you notice that you have skipped a hole and an eyelet, loosen and
fix the springs so that the allocation of the holes on the frame to the eyelets is correct again.
STEP 7 - 8: ASSEMBLY OF THE LOWER NET RODS AND ATTACHMENT OF THE EDGE COVER
Insert the lower net rods (7) into the holes of component 9. Ensure that the securing bolts securely
engage. After this, initially place the edge cover (2) simply on top.
STEP 9: FASTENING OF THE NET ON THE TOP RAIL
Place the safety net (3) on the jumping mat in advance. Follow the steps in Figures 9a and 9b to
insert the top rail rods (13) into the net (3) and attach them to the tube connectors (11). Make sure
that you insert a top-rail rod into the net at an opening in the upper edge of the net, reinforcement
first to the right and WITHOUT reinforcement first to the left. The ends of the two inserted rods are