17. Keep fingers clear from the underside
of the head, collars and blind side of
fasteners and from within the joint being
fastened, during the installation cycle.
18. Do not look directly at the head or
blind side of fasteners during the
installation cycle.
19. During the installation cycle, the tool
will pull and straighten itself to the axis of
the fastener, beware of hands being
trapped against any nearby structure.
KEEP HANDS CLEAR
20. In the event of any difficulty whilst
installing a fastener, releasing the tool
trigger at any time during the installation
cycle will immediately put the tool into
reverse.
21. Beware of fastener pintails which are
ejected, (sometimes forcibly), from the
tool at the completion, or at pintail
fracture, during the installation cycle.
Tools designed to have Pintail Deflectors
and or catchers must never be used
without them.
22. Do not continue to use any equipment
which develops a fault whilst being used.
23. Avoid kinking of hoses or dragging of
hoses and electrical cables over sharp
objects.
2
Summary of Contents for LH-224
Page 2: ......
