5. Clamp inverted tool firmly in a vice,
(use fibre vice clamps). Apply a thin
coating of grease to the O Ring 53 on the
Cylinder Cap 51. Use a 28 mm socket
and torque wrench to tighten the Cylinder
Cap 51 clockwise into the Air Cylinder.
Tighten to 25 to 30 Ft.lb (33.90 to 40.68
Nm).
6. Stand tool on a level surface (e.g.
workbench), then partly unscrew Bleed
Plug 9 to release any excess hydraulic
pressure. Re-tighten Bleed Plug.
7. Connect tool to a suitable air suply and
Cycle tool several times to check for any
leaks and correct function. Continue
testing tool in accordance with the section
in this manual Preparation for Use
18
Summary of Contents for LH-224
Page 2: ......
