Filling and Bleeding Procedure
1. Clamp inverted tool firmly in a vice,
(use fibre vice clamps). Use a 28 mm
socket wrench to unscrew Cylinder Cap
51 anti-clockwise and expose Air Piston
58 & Nut 61.
2. Use a pair of locking pliers, (eg. Mole
Grips), locked onto the Nut 61 and pull
the Air Piston assembly out of the Air
Cylinder.
3. Fill the Handle assembly of the tool
with clean Hydraulic Automatic
Transmission Fluid (ATF). Continue filling
until the fluid is level with the bottom of
the chamfer of the small hydraulic
cylinder in the neck of the tool.
To prevent contamination of the
hydraulic fluid, use a clean container.
4. Clean any contaminates form the Air
Cylinder using a lint free cloth. Insert Air
Piston assembly into Air Cylinder
ensuring that the Piston Rod 49 locates
into its mating cylinder.
Continued on next page.....
17
Summary of Contents for LH-224
Page 2: ......
