Attaching and Operating Control Cable
4. To activate the pump unit, depress the tool trigger switch and let the Powerig® Hydraulic Unit operate for a few
Attach a nose assembly to the installation equipment. Fasteners may now be installed. Follow instructions in the tool
manual.
9
Charge the Battery
New batteries must be charged
Approx. 60 minutes of charging
= 100% battery fuel.
A. Ensure battery charger is
plugged in.
B. Slide battery pack into
charger as shown and allow
battery to charge.
Battery Setup
Attach the 132416 Control Cable
C. Once battery is adequately charged it can be installed on pump unit as shown.
D. To remove the battery from the pump unit press the release buttons on the sides of the battery.
E. Slide the battery out of the pump unit as shown.
C.
D.
E.