3
DANGER - IMPORTANT
DO NOT EXCEED HOSE MINIMUM BEND RADIUS
Failure to heed the warnings below could lead to a damaged hose, damaged tool,
damaged property, personal injury, or death.
• This high pressure hose is not to be used other than assembled in a genuine HUCK
tool or hose assembly or used as a replacement hose of a genuine HUCK tool or
hose assembly.
• Improper use of this product can cause
property damage
,
personal injury
, and
personal injury
personal injury
death
, including but not limited to
electrocution
,
or
loss of limb
caused by
high pressure leak
,
high pressure leak
high pressure leak dangerously whipping hose
or contact with
suddenly moving or falling objects.
• Do not exceed rated working pressure
(700 bar/10150 psi)
or minimum bend
radius (see chart below). Do not use in temperatures less than
-40°C (-40°F)
or
greater than
+100°C (+212°F)
+70°C
(+158°F)
.
• Do not use if hose is kinked, abraded, cut, bulged or leaking. Do not attempt to
repair hose.
• Do not carry tool by hoses.
• Store hose assemblies in a clean dry area.
• Refer to a HUCK hydraulic tool manual for hose inspection & maintenance intervals.
Hose Type
Minimum Bend Radius
126107 Series
2.76 Inches
70 mm
118944 and 124881 Series 2.17 Inches
55 mm
HA and HPH Series
1.97 Inches
50 mm
Glossary of Terms and Symbols
Product complies with re-
quirements set forth by the
relevant UK and European
directives.
NOTES
Notes are reminders of required pro-
cedures.
Read manual before using
equipment.
FONT STYLING
-
Hearing protection is required
while using this equipment.
WARNINGS
Must be understood to avoid severe
personal injury.
Eye protection is required
while using equipment.
CAUTIONS
Show conditions that will damage
equipment or structure.
