7
4.2.4. RUDD REVERSE SET UP
Hold down ENT key for 1 second to enter setting status.Press ENT key to enter
reverse setting status.Move arrow to Rudder by up/down key ,Press ENT key to
choose reverse and then hold EXT key for 2 seconds to confirm and exit.
4.2.5. EXPERT MODE REVERSE SET UP
Hold down ENT key for 1 second to enter setting status.Press ENT key to enter
reverse setting status.Move arrow to Exper mode by up/down key ,Press ENT key to
choose reverse and then hold EXT key for 2 seconds to confirm and exit.
4.2.6 Plane/Helicopter MODE REVERSE SET UP
Hold down ENT key for 1 second to enter setting status.Press ENT key to enter
reverse setting status.Move arrow to Plane type or Helicopter type by up/down key
,Press ENT key to choose reverse and then hold EXT key for 2 seconds to confirm
and exit.
12
6.2 Effect of Control
CAUTION: To avoid loss of control: ALWAYS move the controls S-L-O-W-L-Y! Be
aware that control inputs will reduce available lift (see ‘Helicopter Principles of
Flight’).Be ready to use a little extra Throttle to maintain height during maneuvers.
Throttle (Collective Power) increases/decreases the Flying Height of your helicopter
Rudder (Collective Torque Yaw) rotates your helicopter’s fuselage Left / Right
Elevator (Cyclic Pitch) moves your helicopter Forwards/Backwards
Aileron (Cyclic Roll) moves your helicopter ‘sideways’ Left/Right
MODE 2
MODE 2
MODE 2
MODE 2
MODE 1
MODE 1
MODE 1
MODE 1
5805
HUBSAN
7.7V
Set reverse X
Set sensitive X
Plane type Helicopter
Expert mode Yes
Stick mode Mode 2
5805
HUBSAN
7.7V
Set reverse X
Set sensitive X
Plane type Helicopter
Expert mode Yes
Stick mode Mode 2
5805
HUBSAN
7.7V
Set reverse -
Elevator Normal
Aileron Reverse
Throttle Normal
Rudder Normal
Set sensitive X
Plane type Helicopter
Expert mode No
Stick mode Mode 2
