Hubner U-ONE-Compact UOC40, Configuration Instructions

Page: 25 / 29

U-ONE
®
-SAFETY Compact
Configuration manual SCU C / SRC C / SGS C
USC42_SCU-KonfigManual-en_R5
25
6.2.1 Depiction in the display section
The module is depicted as follows in the display section:
The switching states of the individual switches are represented by switch symbols .
Description Meaning
1 2 3 4 5
1 Module position X2: 2. Terminal box
2 Module type SRC: Position switch module
3 Switch statuses
Graphic switch symbol
Black: Error-free
Gray:
Not configured
Red: Error
4 User designation
Switch designation assigned
by user
5 Module status
Gray: Not configured
Green: error-free
Red: Error
6.3 SGS C module
The SGS C-module is a speed switch module. The speed switch opens or closes de-
pending on the speed. A speed switch module has 3 or 6 speed switches. Switching
modules with 6 speed switches are configured on 2 configuration screens
.
Fundamental-
ly, all switching speed inputs must be within the device-specific switching range
0.5-2520 rpm.
The speed-dependent functions are de-
picted in a graphic in the top part of the
screen.
The input fields for entering speed switch-
ing points are displayed in the lower part of
the screen in table form. One line is allo-
cated to each respective switch (S1-S3 or
S1R to S3L).
The columns are assigned to the respec-
tive speed switching points P1 to P4, and
the switching delay P4 (max. 300 ms).
The following condition applies:
P1 < 0.9 x P2 < 0.9 x P3 < 0.9 x P4
or P1 = P2 = 0
The switching points are depicted in the graph-
ic opposite. A marker indicates the
current speed
Fig. 6-10
:
Configuration SGS C module
Fig.: 6-9 Display Area