U-ONE
®
-SAFETY Compact
Configuration manual SCU C / SRC C / SGS C
USC42_SCU-KonfigManual-en_R5
11
4.1.5 Pulldown menu: File
Offline
In offline mode, a device parameter set can be created without USC 42as follows:
•
A virtual USC 42 is created by entering
the type designation.
•
The configuration of the virtual USC 42
can be carried out.
•
With „Export parameters“ the
parameters are stored and can be
loaded by a USC 42 with the same type
designation.
The offline-state will be exited via
4.1.6 Pulldown menu: Options
Language
Depending on the regional setting of your Windows operating
system the software language is determined. The language
'English' is selected if no corresponding data record is available. It
is possible to select a different language via the menu item
'Language'.
4.1.7 Pulldown menu: Options
Login
To access and work on the assigned user level, the user must log into USC 42 via the
menu item 'Login password' with his or her password.
4.1.8 Pulldown menu: Options
Change password
Admin and Tester passwords are assigned via the menu item 'Change password'. A
closed padlock in the header indicates that a user-specific password has been assigned.
Authorization levels:
Three authorization levels are available to the user; however, it is only possible to
activate two of these levels by means of password authentication. The password must
be between 6-12 ASCII characters (0x20 - 0x7E) in length.
Level 0:
Observer (no password required)
The following functions are available on this level:
- Establish communications with USC 42
- Enter password
- Display assigned parameters
- Display saved parameter sets
Fig.
4-3
: Offline
Fig. 4-4: Settings
