Hubbell GAI-TRONICS E3, Console Manual

Page: 10 / 121

Pub. 42004-550A
Elemec3 Console Manual
—Version 3.0
Page 3 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Define the System ’s Parameters
Action Screen
Identify the system type (Standalone, A-B, N+1).
Set system-wide volume and attenuation levels.
Assign the controller’s network settings such as IP
address (static) or enable DHCP.
Enable/disable event recorder.
Set the maximum mute duration.
Set the maximum attenuation duration.
Set the maximum fault acknowledge duration.
Enable/disable features: mix 2, mix substitution, event
mismatch correction, insert 1 & insert 2.
System Properties (Global Settings on
page 13)
Define the System’s Hardware Devices
Action Screen
Add Amplifiers System Properties
→
Amplifiers
Select the amplifier type.
Edit the amplifier description.
Set the channel ID (1–64).
Set channel zone display.
Enable/disable load testing.
Identify if channel is a standby amp.
Amplifiers (on page 21)
Add Speaker Masters System Properties
→
Speaker Masters
Add Audio Channels Speaker Masters (on page 25)
Add Speaker Remotes System Properties
→
Speaker Remotes
Create Speaker Remotes Speaker Remotes (on page 27)
Add I/O (Input/ Output) Modules System Properties
→
I/O Controllers
Add I/O modules.
Select I/O module type.
I/O Controllers screen (on page 46)
Add Modbus Modules System Properties
→
Modbus
Configure the E3 Modbus module
Add and configure external IP Modbus modules Modbus(on page 54)
Define the System’s Live Audio Sources
Action Screen
Enable Live Audio Sources:
•
Page/Party
•
telephone interface
•
Aux #1–Aux #5
•
IP Aux #1–IP Aux #8
Audio Inputs screen (on page 60)
Set the priority of the audio input sources. Sources Enabled (on page 60)