9
1Method of establishment
Press the new button, enter the method name in the pop-up interface to confirm the
following parameters are added and saved
Delete method
Select the method to delete, press the delete button, and press OK in the pop-up
interface to delete
Implementation standards
The standards implemented by this method are set, including gb/t 3536-2008 and
gb/t267-88 standards for selection
perform step selection
Or select step A
temperature rise speed setting
Setting of heating speed: refer to the corresponding implementation standard for
specific speed
According to the national standard, set whether the segmented control is set
according to the specific situation and how many degrees the segmented point is before
the pre flash point
flash point confirmation
There are three options in total: one flash is valid, continuous flash is valid, and every
other flash is valid.Generally, one flash fire is effective.
