6
timely eliminate the toxic gas in the measurement process, and ensure the safety
and non-toxic of the operator.
Insert the power cord of the instrument into the power socket behind the body, and
the other end into the 220V AC power socket.Power on to work.
The grounding is required to be good, and the power supply shall meet the needs of
the instrument.
IV.Instrument operation instructions
1.Operation instructions of instrument software
Main interface
The main interface operation interface is shown in the following figure:
1. Product Name: automatic open flash point tester
2. Instrument model: hzks-n3
3. Component control switch and button: cooling fan, ignition, mechanism lifting and fire
sweeping once
4. Interface switch button: system setting, method setting, historical data, equipment
detection, instrument calibration, commissioning and analysis interface
